Specification for Tiles and Marble Work:

 

1.     Scope of Work:

Ø This specification outlines the requirements for the installation or repair of tiles and marble surfaces.

Ø The work includes surface preparation, tile/marble installation, grouting, and finishing.

2.     Surface Preparation:

Ø Ensure that the substrate is clean, dry, and free from any debris, oil, or contaminants.

Ø Repair or level uneven surfaces to provide a smooth and even substrate for tile/marble installation.

Ø Prime or apply a suitable bonding agent, if required, to enhance adhesion.

3.     Tile/Marble Selection:

Ø Specify the type, size, and finish of the tiles or marble to be installed, considering the desired aesthetic and functional requirements.

Ø Ensure that the selected tiles or marble meet the necessary quality standards and are suitable for the intended application.

4.     Tile/Marble Installation:

Ø Lay out the tiles or marble according to the approved design or layout plan.

Ø Use an appropriate adhesive or mortar that is compatible with the substrate and the type of tiles/marble being installed.

Ø Ensure proper alignment, spacing, and leveling of the tiles/marble during installation.

Ø Cut or trim the tiles/marble as necessary to fit the edges or corners.

5.     Grouting and Jointing:

Ø Select a suitable grout color that complements the tiles/marble and meets the desired aesthetic.

Ø Apply the grout, ensuring proper filling of the joints and achieving a consistent and even appearance.

Ø Clean excess grout from the tile/marble surface promptly to prevent staining or damage.

6.     Finishing and Sealing:

Ø Clean the installed tiles/marble thoroughly, removing any grout haze or residue.

Ø Apply a suitable sealer or finish to protect the tiles/marble from stains, water penetration, or other damages, if required.

Ø Follow the manufacturer's recommendations for application and drying/curing time.

7.     Compliance and Quality Assurance:

Ø Ensure that the tile/marble installation adheres to the applicable industry standards and building codes.

Ø Conduct regular inspections to verify the quality of workmanship and adherence to specifications.

Ø Rectify any defects or issues promptly.

8.     Cleanup and Waste Disposal:

Ø Cleanup the work area daily, removing debris, packaging materials, and unused materials.

Ø Dispose of waste and leftover materials responsibly, following local regulations.

9.     Timeline and Schedule:

Ø Provide a clear timeline for the tile/marble work, including start and completion dates.

Ø Specify any specific milestones or deadlines within the project, if applicable.

10.  Warranty and Maintenance:

Ø Specify any warranty provided for the tile/marble work, including the duration and coverage.

Ø Provide recommendations for ongoing maintenance and care of the installed tiles/marble surfaces.

Note: It is recommended to consult with professional contractors or tile/marble specialists for accurate specifications and to ensure proper installation techniques based on the specific project requirements.